Nickel AlloyWaya ịgbado ọkụTig WayaERNiCu-7
| Ụkpụrụ |
| EN ISO 18274 - Ni 4060 - NiCu30Mn3Ti |
| AWS A5.14 – ER NiCu-7 |
Atụmatụ na ngwa
Nickel-ọla kọpa alloy emebere maka ịgbado ọkụ Monel.
Ọdịdị dị mma na nguzogide corrosion dị mma na ngwọta saline.
The weld metal nwere magburu onwe iguzogide a nnukwu ego nke corrosive media si.
A na-ejikwa alloy a maka mkpuchi weld.
A na-ejikarị arụ ọrụ mmiri, ọkachasị n'ụsọ osimiri, ndị na-agbanwe ọkụ, pipeline, osisi desalination, chemical, petrochemical na energy engineering wdg.
Ngwa ndị isi a na-ahụkarị
Alloys ego 400 na 404*
* Ihe atụ, ọ bụghị ndepụta zuru oke
| Ngwakọta kemịkalụ% | ||||||
| C% | Mn% | Fe% | P% | S% | Si% | |
| max | 3.00 | 0,50 | max | max | max | |
| 0.15 | 4.00 | 2.50 | 0.020 | 0.015 | 1.00 | |
| Cu% | Ni% | Co% | Ti% | Al% | Nb+Ta% | |
| 28.00 | 62.00 | max | 1.50 | max | max | |
| 32.00 | 69.00 | 1.00 | 3.00 | 1.00 | 0,50 | |
| Ihe eji arụ ọrụ | ||
| Ike ọdụdọ | ≥450 MPa | |
| Mpụta Ike | ≥180 MPa | |
| Ogologo oge | ≥30% | |
| Mmetụta Mmetụta | ≥80 J | |
Ngwongwo eji arụ ọrụ dị ihe dị ka ma nwee ike ịdịgasị iche dabere na ọkụ, ikuku mkpuchi, paramita ịgbado ọkụ na ihe ndị ọzọ.
Gases na-echebe
TS EN ISO 14175 - TIG: I1 (Argon)
Ọnọdụ ịgbado ọkụ
TS EN ISO 6947-PA, PB, PC, PD, PE, PF, PG
| Data nkwakọ | |||
| Dayameta | Ogologo | Ibu | |
| 1.60 mm 2.40 mm 3.20 mm | 1000 mm 1000 mm 1000 mm | 5 n'arọ 5 n'arọ 5 n'arọ | |
Ọrụ: Ọ bụ ezie na agbasiri mbọ niile ezi uche dị na ya iji hụ na izi ezi nke ozi dị n'ime ya, ozi a nwere ike ịgbanwe n'enweghị ọkwa ma enwere ike iwere ya dị ka dabara adaba maka ntuziaka izugbe.
