ER70S2 bụ waya MIG & TiG adịchaghị maka ịgbado ọkụ n'ọkwa niile nke dị nro na carbon steel, na-emepụta welds dị mma na obere porosity.Ọ bụ waya deoxidized ugboro atọ (Zirconium, Titanium, na Aluminom) na-eme ka ọ bụrụ ezigbo nhọrọ maka ịgbado ọkụ n'elu nchara na igwe igwe.Enweghị mgbanwe ọ bụla achọrọ na ngwaahịa a.
Ngwa ahụkarị:
ọkpọkọ na ihe ndị na-egwupụta ihe n'ụsọ oké osimiri, ọrụ ígwè arụrụ arụ
Ọnọdụ ịgbado ọkụ: F, V, OH, H | Ugbu a: DCEP |
Ike tensile, kpsi: | 70 |
Ike Mpụta, kpsi: | 58 |
Mgbatị na 2"%: | 22 |
Ụdị Charpy V-Notch: 35 ft.-lb.Na -20 degrees F
Chemistry Waya a na-ahụkarị dịka AWS A5.18 (ụkpụrụ otu kacha)
C | Mn | Si | P | S | Ni | Cr | Mo | V | Cu | Ti | Zr | Al | ||
0.07 | 0.90-1.40 | 0.40-0.70 | 0.025 | 0,035 | 0.15 | 0.15 | 0.15 | 0.03 | 0,50 | 0.05-0.15 | 0.02-0.12 | 0.05-0.15 | ||
Ụdị ịgbado ọkụ a na-ahụkarị | ||||||||||||||
Dayameta | Usoro | Volt | Amps | Gas na-echebe | ||||||||||
in | (mm) | |||||||||||||
.035 | (0.9) | GMAW | 28-32 | 165-200 | Nyefee 98% Argon + 2% Oxygen ma ọ bụ 75% Argon + 25% CO2 | |||||||||
.045 | (1.2) | GMAW | 30-34 | 180-220 | Nyefee 98% Argon + 2% Oxygen ma ọ bụ 75% Argon + 25% CO2 | |||||||||
1/16 | (1.6) | GMAW | 30-34 | 230-260 | Nyefee 98% Argon + 2% Oxygen ma ọ bụ 75% Argon + 25% CO2 | |||||||||
.035 | (0.9) | GMAW | 22-25 | 100-140 | Nyefe obere okirikiri 100% CO2 ma ọ bụ 75% Argon + 25% CO2 | |||||||||
.045 | (1.14) | GMAW | 23-26 | 120-150 | Nyefe obere okirikiri 100% CO2 ma ọ bụ 75% Argon + 25% CO | |||||||||
1/16 | (1.6) | GMAW | 23-26 | 160-200 | Nyefe obere okirikiri 100% CO2 ma ọ bụ 75% Argon + 25% CO | |||||||||
.035 | (0.9) | GTAW | 13-16 | 60-100 | 100% Argon | |||||||||
.045 | (1.14) | GTAW | 13-16 | 70-120 | 100% Argon | |||||||||
1/16 | (1.6) | GTAW | 12-15 | 100-125 | 100% Argon | |||||||||
3/32 | (2.4) | GTAW | 15-20 | 125-175 | 100% Argon | |||||||||
1/8 | (3.2) | GTAW | 15-20 | 175-250 | 100% Argon |