| Ụdị ọkwa ígwè | Ebu ígwè: |
| Ọkọlọtọ |
|
| Nkọwapụta mmepụta | Efere ígwè, mpempe akwụkwọ, eriri igwe, ogwe dị larịị, ogwe gburugburu, ígwè eriri, waya, ụdị ihe mkpuchi niile. |
| Ịrụ ọrụ igwe | Ịgbagharị Ịkụ ihe Ịgweri Ọkụ olulu miri emi: ogologo kachasị mita 9.8. |
| Oke ọrụ | ígwè gburugburu: 1mm ruo 2000mm Ígwè dị ka akụkụ anọ: 10mm ruo 1000mm efere ígwè/mpempe akwụkwọ: 0.08mm ruo 800mm Obosara: 10mm ruo 1500mm Oge Oriri: Anyị nwere ike inye onyinye ọ bụla dabere na ihe onye ahịa chọrọ. Ịkpụ ihe: Ogwe nwere akụkụ/ọkpọ/ọkpọ/ọkpọ/ọkpọ/donuts/kube/ụdị ndị ọzọ Ọkpọkọ: OD: φ4-410 mm, ọkpụrụkpụ mgbidi ya dịkwa site na 1-35 mm. |
| Ọgwụgwọ okpomọkụ | Ịhazi, Ịkwanye, Ịkpọnwụ, Ịkwụsị, Ime ka ihe sie ike ma na-eme ka ọ dị jụụ, Ịmepụta ihe na-esi ísì ụtọ, Ime ka ihe dị nro sie ike, Ịkwanye ihe na-esi ísì ụtọ |
Ihe mejupụtara kemịkalụ na ihe onwunwe igwe AWS E10015-D2:
| C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Cr | Ni |
| 0.15 | 0.6 | 1.65-2.0 | 0.03 | 0.03 | ≤0.9 | |
| Mo | Al | Cu | Nb | Ti | V | Ce |
| 0.25-0.45 | ||||||
| N | Co | Pb | B | Ndị ọzọ |
NGWỌTA MGBE:
| Njirimara | Ọnọdụ | ||
| T (°C) | Ọgwụgwọ | ||
| Njupụta (×1000 kg/m3) | 7.7-8.03 | 25 |
|
| Oke Poisson | 0.27-0.30 | 25 |
|
| Modulu Elastic (GPa) | 190-210 | 25 |
|
| Ike nrụgide (Mpa) | 1158 | 25 | mmanụ a gbanyụrụ agbanyụ, a kpụchara ya nke ọma, a na-eme ka ọ dị ọkụ na 425°C |
| Ike Mmepụta (Mpa) | 1034 | ||
| Ogologo (%) | 15 | ||
| Mbelata na Mpaghara (%) | 53 | ||
| Ike siri ike (HB) | 335 | 25 | mmanụ a gbanyụrụ agbanyụ, a kpụchara ya nke ọma, a na-eme ka ọ dị ọkụ na 425°C |
| Njirimara | Ọnọdụ | ||
| T (°C) | Ọgwụgwọ | ||
| Ọgbakọ okpomọkụ (W/mK) | 42.7 | 100 | |
| Okpomọkụ Pụrụ Iche (J/kg-K) | 477 | 50-100 | |
ÀGWÀ AHỤ́:
| Ọnụọgụ | Uru | Ngalaba |
| Mgbasawanye okpomọkụ | 16 - 17 | e-6/K |
| Ọkwa okpomọkụ | 16 - 16 | W/mK |
| Okpomọkụ kpọmkwem | 500 - 500 | J/kg.K |
| Okpomọkụ agbaze | 1370 - 1400 | °C |
| Okpomọkụ ọrụ | 0 - 500 | °C |
| Njupụta | 8000 - 8000 | kg/m3 |
| Nguzogide | 0.7 - 0.7 | Ohm.mm2/m |
E7015-G Electrodes mkpuchi hydrogen dị ala na sodium
NKỌWA:
Ọ bụ mkpanaka ịgbado ígwè dị ala nke nwere obere mkpuchi sodium hydrogen nwere nickel. Enwere ike iji njikọ dc reverse mee njikọta ịgbado ọkụ zuru oke. N'ime -80°C, ígwè ịgbado ọkụ ka nwere ezigbo ike mmetụta.
OJIJI:
Ejiri ígwè rụọ ọrụ nke nwere usoro ígwè 1.5Ni nke a na-akpọ Welded -80°C.
Ngwakọta Kemịkalụ Ígwè E tinyere n'ime ya:
| C | Mn | Si | Ni | S | P | |
| Ọkọlọtọ | ≤0.08 | ≤1.25 | ≤0.60 | ≥1.00 | ≤0.035 | ≤0.035 |
| Ule | 0.045 | 0.60 | 0.27 | 1.80 | 0.010 | 0.015 |
Arụmọrụ igwe ígwè e tinyere n'ọnọdụ ya:
| Ike Nrụgide Rm (MPa) | Ike Mmepụta Rel (MPa) | Ogologo A (%) | -80°C Mmetụta Uru Akv (J) | |
| Ọkọlọtọ | ≥490 | ≥390 | ≥22 | ≥27 |
| Ule | 530 | 445 | 30 | 100 |
UGBU A NA-EME KA Ọ DỊ MMA (DC+):
| Dayameta (mm) | 3.2 | 4.0 | 5.0 | |
| Ogologo (mm) | 350 | narị anọ | narị anọ | |
| Ugbu a (A) | 90-120 | 140-180 | 180-210 |
| E12015-G | Dịka GB E8515-G si kwuo Dakọtara na AWS E12015-G |
Okwu Mmalite: E12015-G bụ ụdị elektrọd ígwè dị ike nke nwere obere alloy nwere mkpuchi ụdị hydrogen natrium dị ala. DCRP (Ọnọdụ Polarity nke Na-agbanwe Ugbu A). Ịgbado ọkụ n'ọnọdụ niile.
Ngwa: A na-eji ya agbado ihe owuwu ígwè dị ike nke nwere obere alloy, nke nwere ike ịdọkpụ ihe dịka 830MPa.
Ihe mejupụtara kemịkalụ nke ígwè e tinyere n'ime ya (%)
| Ngwakọta Kemịkalụ | C | Mn | Si | S | P | Mo |
| Uru nkwa | ≤0.15 | ≥1.00 | 0.4~0.8 | ≤0.035 | ≤0.035 | 0.60~1.20 |
| Nsonaazụ Izugbe | ≤0.10 | ~1.50 | ≤0.70 | ≤0.020 | ≤0.020 | ~0.90 |
Njirimara Mechanical nke Metal E tinyere n'ime ya
| Ihe Nnwale | Rm(MPa) | ReL ma ọ bụRp0.2(Mpa) | A(%) | KV2(J) |
| Uru nkwa | ≥830 | ≥740 | ≥12 | —(okpomọkụ nkịtị) |
| Nsonaazụ Izugbe | 860~950 | ≥750 | 12~20 | ≥27 |
Ọdịnaya Haịdrojin nke A Na-agbasa n'ime Metal E tinyere n'ime ya: ≤5.0ml/100g (Kromatography)
Nnyocha X-ray nke redio: Ⅰ Ogo
NTỤZI AKA:
1. A ga-eme ka elektrọd ndị ahụ sie n'okpuru okpomọkụ 350-400℃ ruo otu awa tupu ịgbado ọkụ, tinye ha n'ime ihe mkpuchi ma tinye ha ozugbo achọrọ ha.
2. A ga-ekpochapụ ntụpọ dị na weld dị ka nchara, a ga-ekpochapụkwa weld ahụ ruo ihe dị ka 200℃.
3. Enwere ike ime ka Weld dị jụụ n'okpuru 600-650℃ mgbe ịgbado ọkụ ka o wee wepụ nrụgide dị n'ime.
