Aluminom na Aluminom Alloy Electrode
L109
GB/T E1100
AWS A5.3 E1100
Nkọwa: L109 bụ electrode aluminom dị ọcha nke nwere ihe mkpuchi nnu.Jiri DCEP (ezigbo electrode ugbu a kpọmkwem).Gbalịa iji obere arc iji weld.
Ngwa: Eji maka ịgbado ọkụ aluminom efere na dị ọcha aluminum containers.
Ngwakọta kemịkalụ nke igwe weld (%):
| Si+Fe | Cu | Mn | Zn | Al | Ndị ọzọ |
| ≤0.95 | 0.05 ~ 0,20 | ≤0.05 | ≤0.10 | ≥99.0 | ≤0.15 |
Njirimara nke igwe weld metal:
| Nwalee ihe | Ike ọdụdọ Mpa |
| Ekwenyere | ≥80 |
Akwadoro ugbu a:
| Dayameta mkpanaka (mm) | 3.2 | 4.0 | 5.0 |
| Welding ugbu a (A) | 80 ~ 100 | 110 ~ 150 | 150 ~ 200 |
Mara:
1. Eletrọd dị nnọọ mfe ka mmiri na-emetụta ya, n'ihi ya, a ga-echekwa ya n'ime akpa ikuku na-ekpo ọkụ ka ọ ghara imebi ya n'ihi mmiri;A ghaghị ime electrode na ihe dịka 150 Celsius maka awa 1 ruo 2 tupu ịgbado ọkụ;
2. Ekwesịrị iji efere nkwado tupu ịgbado ọkụ, na ịgbado ọkụ ga-eme mgbe preheating na 200 ~ 300 Celsius dị ka ọkpụrụkpụ nke welding;mkpanaka ịgbado ọkụ kwesịrị ịdị n'elu elu nke welding, arc kwesịrị ịdị mkpụmkpụ dị ka o kwere mee, a ga-emerịrị ngwa ngwa ngbanwe nke ịgbado ọkụ;
3. A ghaghị ihicha mmanụ na ihe ndị na-adịghị ọcha tupu ịgbado ọkụ, a ga-ewepụkwa slag ahụ nke ọma mgbe ịgbado ọkụ, ma kpochaa ya na uzuoku ma ọ bụ mmiri ọkụ.
Wenzhou Tianyu Electronic Co., Ltd. e guzobere na 2000. Anyị na-etinye aka na mmepụta nke electrodes ịgbado ọkụ, mkpara ịgbado ọkụ, na ịgbado ọkụ consumables n'ihi na ihe karịrị 20 afọ.
Ngwaahịa anyị bụ isi gụnyere igwe anaghị agba nchara igwe anaghị agba nchara, carbon steel ịgbado ọkụ electrodes, ala alloy ịgbado ọkụ electrodes, surfacing ịgbado ọkụ electrodes, nickel & cobalt alloy ịgbado ọkụ electrodes, nwayọọ ígwè & ala alloy ịgbado ọkụ wires, igwe anaghị agba nchara welding wires, gas-shielded flux cored wires, waya ịgbado ọkụ aluminom, ịgbado ọkụ n'okpuru mmiri.wires, nickel & cobalt alloy welding wires, brass welding wires, TIG & MIG welding wires, tungsten electrodes, carbon gouging electrodes, na ndị ọzọ ịgbado ọkụ ngwa & consumables.
EN 573-3: E Al
DIN: 1732: EL-Al
Atụmatụ & Ngwa:
Maka ịgbado ọkụ aluminoms na ọla kọpa, silicon, na magnesium.Ọ dịkwa oke mma maka isonye na akara ule aluminom.
Eletrọde ịgbado ọkụ aluminom dị ọcha nwere slag na-ebuli onwe ya.Akara ule ndị ọzọ dị ka 12% Si, 5% Si na Al Mn, wdg dịkwa.
Slag na-ebuli onwe ya pụrụ iche.
Ọcha dị ọcha ogologo ndụ ndụ extruded flux mkpuchi agwụla omenala ngwaahịa na mmiri nguzogide.
Enwere ike ịmepụta ya na agba omenala dị iche iche.
A na-enweta ya na mgbanaka mgbanaka PURE ALUMINUM nke ejiri mechiri emechi ma ọ bụ akpa foil juru n'ọnụ maka ndụ ogologo ndụ.
Ntụle Ọla Weld niile (Arọ a na-ahụkarị%):
lux Agba: Agba ọcha ma ọ bụ omenala
| Si | Cu | Fe | Ti | Mn | Zn | Be | Al |
| .091 | .05 | .45 | .01 | .005 | .002 | .0002 | Bal. |
AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ
Uru kacha mma ruru:
Ike nkwụsị: 34,000 psi (250 N/MPa)
Ike Mpụta: 20,000 psi (150 N/MPa)
Mgbatị: 5%
| Welding Ugbu a & Ntuziaka | ||
| Akwadoro ugbu a: DC Reverse (+) | ||
| Dayameta (mm) | 3/32 (2.5) | 1/8 (3.25) |
| Amperage kacha nta | 50 | 70 |
| Amperage kacha | 80 | 120 |
Usoro ịgbado ọkụ: Malite site na iji akụkụ elu nke oke amperage.Na-enye electrode ngwa ngwa ma gaa ngwa ngwa na-edobe oghere arc dị nso.
Ọnọdụ ịgbado ọkụ: Flat, kwụ ọtọ
Ọnụ ego nkwụnye ego:
| Dayameta (mm) | Ogologo(mm) | Weldmetal/Electrode | Electrodes perlb (kg) nke Weldmetal | Oge Arc nke nkwụnye ego min/lb (kg) | Ntọala Amperage | Ọnụego mgbake |
| 3/32 (2.5) | 14 ″ (350) | .14oz (4.3g) | 114 (251) | 110 (242) | 70 | 90% |
| 1/8 (3.25) | 14 ″ (350) | .23oz (6.5g) | 70 (153) | 62 (136) | 110 | 90% |
| 5/32 (4.0) | 14 ″ (350) | .33oz (9.6g) | 48 (107) | 47 (103) | 135 | 90% |
Mkpokọta ELECTRODE OKWU & akụkụ:
| Dayameta (mm) | 3/32 (2.5) | 1/8 (3.25) | 5/32 (4.0) |
| Ogologo (mm) | 14 ″ (350) | 14 ″ (350) | 14 ″ (350) |
| Electrodes / lb | 49 | 33 | 23 |
| Electrodes / kg | 108 | 73 | 51 |
