EN 573-3: E AlSi12
DIN 1732: EL-Al Si12
Atụmatụ na ngwa:
Maka njikọta arc, aluminom ejiri ọla kọpa, silicon, na magnesium gwakọta.
Ọ dịkwa mma maka ijikọ ụdị aluminom dị iche iche.
Electrọd silicon aluminum arc welding nke nwere 12% nke ihe na-ebuli onwe ya elu. E nwekwara ụdị aluminom ndị ọzọ dịka Al 99, Al Mn, wdg.
Slag pụrụ iche nke na-ebuli onwe ya elu.
Mkpuchi flux nke e si n'elu mee nke ọcha dị ọcha na-adịgide karịa ngwaahịa nkịtị n'enweghị mmiri.
Enwere ike imepụta ya n'ọtụtụ agba pụrụ iche.
A na-enweta ya na ite mgbanaka PURE ALUMINUM nke e ji hermetically mechie ma ọ bụ akpa foil e ji ihe mkpofu ekpuchi maka ogologo oge nchekwa.
A na-enwetakwa ya n'ụdị TIG dị ka koodu ihe 6047, n'ụdị MIG dị ka koodu ihe 7091 na dị ka ihe gba ọtọ.
Alloy ọkụ ọkụ dịka koodu ihe 2191:
| Nyocha nke ígwè Weld niile (Ibu nkịtị%) | |||||
| Agba na-agbanwe agbanwe: Ọcha ma ọ bụ Agba ahaziri ahazi | |||||
| 12.1 | .001 | .15 | .01 | .003 | .001 |
| Si | Cu | Fe | Mg | Mn | Zn |
| Ịgbado ọkụ ugbu a na ntuziaka | ||
| Ugbu a akwadoro: DC Reverse (+) | ||
| Dayameta (mm) | 3/32 (2.5) | 1/8 (3.25) |
| Amperage kacha nta | 50 | 70 |
| Ampereji Kachasị | 80 | 120 |
Usoro Ịgbado ọkụ: Malite site na iji akụkụ elu nke oke amperage. Nye elektrọd ahụ ngwa ngwa ma gaa ngwa ngwa na-ejide oghere arc dị nso.
Ọnọdụ ịgbado ọkụ: Dị larịị, Kwụ ọtọ
Ọnụego nkwụnye ego:
| Dayameta (mm) | Ogologo (mm) | Njikọ Weld/Elektrod | Electrọd kwa lb (kg) nke Weldmetal | Oge Arc nke Mbelata min/lb (kg) | Ntọala Amperage | Ọnụego Mgbake |
| 3/32 (2.5) | 14″(350) | .14oz (4.3g) | 114 (251) | 110 (242) | 70 | Pasentị iri itoolu |
| 1/8 (3.25) | 14″ (350) | .23oz (6.5g) | 70 (153) | 62 (136) | 110 | Pasentị iri itoolu |
| 5/32 (4.0) | 14″ (350) | .33oz (9.6g) | 48 (107) | 47 (103) | 135 | Pasentị iri itoolu |
NKWEKỌTA NA NKE ELECTRODE DỊ KACHASỊ:
| 3/32 (2.5) | 1/8 (3.25) | |
| Ogologo (mm) | 14″ (350) | 14″ (350) |
| Electrọd / lb | 49 | 33 |
| Elektrọd / kg | 108 | 73 |
